Henan Bedo Machinery Equipment Co.,LTD
QUALITY IS OUR CULTURE!
Add to Cart
80-200 Mesh Bamboo Wood Powder Making Machine CE Approved
The vertical Wood powder making machine uses grinding wheels to grind, and uses the ultra-fine powder method of impact, squeeze, and roller grinding to grind the wood to below 300-500 mesh. It is Chinese advanced wood mill processing equipment.
The grinding device adopts overlapping multi-stage sealing, all fine powder can be recovered, and the equipment is clean and environmentally friendly. The periphery of the host adopts a water-cooling cycle to ensure that the machine can run continuously for 24 hours.
The finished product ranges from 60 to 500 meshes, equipped with a professional impeller governor, and the particle size of the finished product can be adjusted without stopping the machine.
The Wood powder making machine can grind spice wood, bamboo, Chinese herbal medicine, pearls, chemical raw materials and others into powder. It is a high-quality processing machine for chemical, pharmaceutical, breeding, food, incense, and mosquito-repellent incense materials.
| Material | Time(hour) | Fineness (mesh) | Capacity(kg) | Screening rate (%) | Humidity(%) |
| Poplar sanding powder | 1 | 80 | ≤320 | ≤98 | ≤15 |
| Poplar sawdust | 1 | 80 | ≤270 | ≤98 | ≤14 |
| Thorns | 1 | 80 | ≤270 | ≤98 | ≤15 |
| Pine sawdust | 1 | 80 | ≤280 | ≤98 | ≤15 |
| Cypress sawdust | 1 | 80 | ≤280 | ≤98 | ≤18 |
| Dried cypress branches | 1 | 100 | ≤220 | ≤98 | ≤13 |
| Sticky wood | 1 | 90 | ≤220 | ≤98 | ≤10 |
| Wheat bran | 1 | 140 | ≤170 | ≤98 | ≤8 |
| Cassava residue | 1 | 150 | ≤160 | ≤98 | ≤20 |
| Bamboo powder | 1 | 150 | ≤170 | ≤98 | ≤15 |
1. It can process wood, leather, food, medicine and other materials, and the finished product can be 40-500 mesh.
2. There is a fineness analyzer in the body. After loosening the bolts on the analyzer, move upwards to increase the fineness and downwards to decrease the fineness.The output fineness can be adjusted at any time.
3. There is an iron separator inside, which can automatically adsorb metal blocks to prevent the metal from wearing inside the machine and improve the safety production factor.
4. The wheel is made of H13 alloy material, which has high toughness and good wear resistance. The machine can work continuously for 24 hours.
5. Under the action of high-pressure centrifugal force, the grinding force is increased by 60-80%, and the output is 150-300%higher than that of the hammer mill. In the case of the same output and fineness index, when crushing wood chips, the energy consumption is 3/2 lower than that of the hammer mill.
Q1:Before the equipment leaves the factory, we will provide you with these services:
1. We will conduct a comprehensive test on the machine, and there will be obvious safety warning slogans in the position of the main parts of the machine. Such as filling hydraulic oil, equipment rotation direction, etc.
2. After the machine is loaded into the container, all accessories will be packed into a wooden box, and the installation serial number and the shipping list will be marked.
3. The photos when the machine is loaded will be sent to you. And prepare installation video and safety manual for you while the equipment is working.
Q2:How long is your delivery time?
If there is stock, it usually takes 5-10 days. It takes 20-30 days to customize the equipment according to your requirements.
